Kriven Group

Publications

Full Publication List (pdf)

2022

  1. "Comparative study of titanate syntheses by the organic steric entrapment method." Rosczyk, Benjamin R., Sang-Jin Lee, and Waltraud M. Kriven. International Journal of Applied Ceramic Technology 19, no. 1 (2022): 200-209.

2021

  1. "A new class of entropy stabilized oxides: Commensurately modulated A₆B₂O₁₇ (A= Zr, Hf; B= Nb, Ta) structures." Voskanyan, Albert A., Kristina Lilova, Scott J. McCormack, Waltraud M. Kriven, and Alexandra Navrotsky. Scripta Materialia 204 (2021): 114139.

  2. "Transient Thermo-mechanical stress analysis of hot surface probe using sequentially coupled CFD-FEA Approach." Kang, Sang-Guk, Je Ir Ryu, Austen H. Motily, Prapassorn Numkiatsakul, Tonghun Lee, Waltraud M. Kriven, Kenneth S. Kim, and Chol-Bum M. Kweon. In Internal Combustion Engine Division Fall Technical Conference, vol. 85512, p. V001T06A008. American Society of Mechanical Engineers, 2021.

  3. "Acid resistance of metakaolin-based, bamboo fiber geopolymer composites." Ribeiro, Marilene G. Sá, Marilia G. Sá Ribeiro, Patrick F. Keane, Mauro R. Sardela, Waltraud M. Kriven, and Ruy A. Sá Ribeiro. Construction and Building Materials 302 (2021): 124194.

  4. "Amorphous self-glazed, chopped basalt fiber reinforced, geopolymer-based composites." Chadha, Vimanyu, and Waltraud M. Kriven. International Journal of Applied Ceramic Technology 18, no. 4 (2021): 1097-1105.

  5. "Relative importance of Al (V) and reinforcement to the flexural strength of geopolymer composites." Samuel, Devon M., Andre Sutrisno, and Waltraud M. Kriven. Journal of the American Ceramic Society 104, no. 7 (2021): 3452-3460.

  6. "Amorphous self-healed, chopped basalt fiber-reinforced, geopolymer composites." Keane, Patrick F., John S. Foltz, Vimanyu Chadha, Charles P. Marsh, and Waltraud M. Kriven. Journal of the American Ceramic Society 104, no. 7 (2021): 3443-3451.

  7. "Tailorable thermal expansion in leucite-pollucite materials derived from geopolymers for environmental barrier coatings." Steveson, Andrew J., and Waltraud M. Kriven. Journal of the American Ceramic Society 104, no. 7 (2021): 3397-3410.

  8. "Thermal expansion and phase transformation in the rare earth di-titanate (R₂Ti₂O₇) system." Hulbert, Benjamin S., Scott J. McCormack, K-P. Tseng, and Waltraud M. Kriven. Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials 77, no. 3 (2021).

  9. "Bone ash reinforced geopolymer composites." Bhuiya, Abdul W., Michael Hu, Kaushik Sankar, Patrick F. Keane, Daniel Ribero, and Waltraud M. Kriven. Journal of the American Ceramic Society 104, no. 6 (2021): 2767-2779.

  10. "Flowable slag-fly ash binders for construction or repair." Kriven, Waltraud M., Kaushik Sankar, and Ghassan K. Al-Chaar. U.S. Patent 11,014,852, issued May 25, 2021.

  11. "Mechanical behavior of K-geopolymers reinforced with silane-coated basalt fibers." Trindade, Ana Carolina Constâncio, Flávio de Andrade Silva, and Waltraud M. Kriven. Journal of the American Ceramic Society 104, no. 1 (2021): 437-447.

2020

  1. "Directions of zero thermal expansion and the peritectic transformation in HfTiO₄." McCormack, Scott J., William A. Wheeler, Benjamin S. Hulbert, and Waltraud M. Kriven. Acta Materialia 200 (2020): 187-199.

  2. "Properties and characterization of alumina platelet reinforced geopolymer composites." Kutyla, Gregory P., and Waltraud M. Kriven. Journal of the American Ceramic Society 103, no. 9 (2020): 5178-5185.

  3. "High-entropy, phase-constrained, lanthanide sesquioxide." Tseng, Kuo-Pin, Qun Yang, Scott J. McCormack, and Waltraud M. Kriven. Journal of the American Ceramic Society 103, no. 1 (2020): 569-576.

2019

  1. "Reply to comments: In-situ determination of the HfO₂-Ta₂O₅-temperature phase diagram up to 3000°C." McCormack, Scott J., Kuo-Pin Tseng, Richard JK Weber, Denys Kapush, Sergey V. Ushakov, Alexandra Navrotsky, and Waltraud M. Kriven. Journal of the American Ceramic Society 102, no. 11 (2019): 7028-7030.

  2. "Formation of Alpha/Beta-Si₃N₄ nanoparticles by carbothermal reduction and nitridation of geopolymers." Bagci, Cengiz, Qun Yang, and Waltraud M. Kriven. Journal of the American Ceramic Society 102, no. 11 (2019): 6542-6551.

  3. "Influence of pore structure on the strength behavior of particle-and fiber-reinforced metakaolin-based geopolymer composites." Akono, Ange Therese, Seid Koric, and Waltraud M. Kriven. Cement and Concrete Composites 104 (2019): 103361.

  4. Rehabilitation of Deteriorated Wood Railroad Ties Using Inorganic Polymers: Final Report on Project F17 AR03. Al-Chaar, Ghassan K., Kaushik Sankar, and Waltraud M. Kriven. No. ERDC/CERL-TR-19-15. ERDC Champaign United States, 2019.

  5. "Development of mechanical properties in dental resin composite: Effect of filler size and filler aggregation state." Rodríguez, Henry A., Waltraud M. Kriven, and Herley Casanova. Materials Science and Engineering: C 101 (2019): 274-282.

  6. "In-situ determination of the HfO₂-Ta₂O₅ temperature phase diagram up to 3000°C." McCormack, Scott J., et al. Journal of the American Ceramic Society 102.8 (2019): 4848-4861.

  7. "Flowable slag-fly ash binders for construction or repair." Kriven, Waltraud M., Kaushik Sankar, and Ghassan K. Al-Chaar. U.S. Patent Application No. 16/255,131.

  8. "Slag-fly ash and slag-metakaolin binders: Part II” Properties of precursors and NMR study of poorly ordered phases." Sankar, Kaushik, Andre Sutrisno, and Waltraud M. Kriven. Journal of the American Ceramic Society 102.6 (2019): 3204-3227.

  9. "Sodium silicate activated slag-fly ash binders: Part III” Composition of soft gel and calorimetry." Sankar, Kaushik, Peter Stynoski, and Waltraud M. Kriven. Journal of the American Ceramic Society 102.6 (2019): 3175-3190.

  10. "Crystal structure solution for the A₆B₂O₁₇ (A= Zr, Hf; B= Nb, Ta) superstructure." McCormack, Scott J., and Waltraud M. Kriven. Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials 75.2 (2019).

  11. "Alpha-Alumina and spinel react into single-phase high-alumina spinel in< 3 seconds during flash sintering." Kok, David, et al. Journal of the American Ceramic Society 102.2 (2019): 644-653.

  12. "Temperature gradients for thermophysical and thermochemical property measurements to 3000°C for an aerodynamically levitated spheroid." McCormack, Scott J., et al. Review of Scientific Instruments 90.1 (2019): 015109.

  13. "Amazonian metakaolin reactivity for geopolymer synthesis." Sa Ribeiro, Ruy A., et al. Advances in Materials Science and Engineering 2019 (2019).

2018

  1. "Sodium silicate activated slag-fly ash binders: Part I“Processing, microstructure, and mechanical properties." Sankar, Kaushik, et al. Journal of the American Ceramic Society 101.6 (2018): 2228-2244.

  2. "In-situ investigation of Hf₆Ta₂O₁₇ anisotropic thermal expansion and topotactic, peritectic transformation." McCormack, Scott J., Richard J. Weber, and Waltraud M. Kriven. Acta Materialia 161 (2018): 127-137.

  3. "Sodium silicate activated slag-fly ash binders: Part I“Processing, microstructure, and mechanical properties." Sankar, Kaushik, et al. Journal of the American Ceramic Society 101.6 (2018): 2228-2244.

  4. "Porous geopolymers." Kim, Dong Kyu, and Waltraud M. Kriven. U.S. Patent No. 9,957,197. 1 May 2018.

2017

  1. "Fully Reacted High Strength Geopolymer made with Diatomite as a Fumed Silica Alternative."Bagci, Cengiz, Gregory P. Kutyla, and Waltraud M. Kriven. Ceramics International (2017).

  2. "Microstructural damage of Alpha-Al₂O₃ by high energy density plasma." Yang, Q., et al. Acta Materialia 132 (2017): 479-490.

  3. "Geopolymer reinforced with E-glass leno weaves." Sankar, Kaushik, and Waltraud M. Kriven. Journal of the American Ceramic Society 100.6 (2017): 2492-2501.

  4. "In-situ Measurements of Lattice Expansion Related to Defect Generation During Flash Sintering." Lebrun, J-M., et al. Journal of the American Ceramic Society (2017).

  5. Developments in Strategic Ceramic Materials II: Ceramic Engineering and Science Proceedings Volume 37. Fukushima, Manabu, and Andrew Gyekenyesi. No. 7. John Wiley & Sons, 2017.

  6. "Mica Platelet-Reinforced Geopolymer Composites." Keane, P. F., et al. Developments in Strategic Ceramic Materials II: Ceramic Engineering and Science Proceedings Volume 37 7 (2017): 12.

  7. "Properties of Cork Particle Reinforced Sodium Geopolymer Composites." Roper, Daniel S., Gregory P. Kutyla, and Waltraud M. Kriven. Developments in Strategic Ceramic Materials II: Ceramic Engineering and Science Proceedings Volume 37 7 (2017): 79.

  8. "Potassium-Based Geopolymer Composites Reinforced with Chopped Bamboo Fibers." Sankar, Kaushik, et al. Journal of the American Ceramic Society 100.1 (2017): 49-55.

2016

  1. "Synthesis of NaTi₂(PO₄)₃ by the Inorganic-Organic Steric Entrapment Method and Its Thermal Expansion Behavior." Ribero, Daniel, Kevin C. Seymour, and Waltraud M. Kriven. Journal of the American Ceramic Society99.11 (2016): 3586-3593.

  2. "Relationship Between the Orthorhombic and Hexagonal Phases in Dy₂TiO₅." Seymour, Kevin C., et al. Journal of the American Ceramic Society99.11 (2016): 3739-3744.

  3. "Geopolymer-bamboo composite-A novel sustainable construction material." Ribeiro, Ruy A. Sá, et al. Construction and Building Materials 123 (2016): 501-507.

  4. "Broadening of diffraction peak widths and temperature nonuniformity during flash experiments." Lebrun, Jean-Marie, et al. Journal of the American Ceramic Society 99.10 (2016): 3429-3434.

  5. "Experimental study of embedded and non-embedded ordered granular chains under impulsive excitation." Avagyan, Arik, et al. Acta Mechanica 227.9 (2016): 2511-2527.

  6. Ceramics for Environmental Systems: Ceramic Transactions. Singh, Mrityunjay, Tatsuki Ohji, and Alexander Michaelis. Vol. 257. John Wiley & Sons, 2016.

  7. "Synthesis and Characterization of Silicon Carbide Powders Converted from Metakaolin-Based Geopolymer." Bagci, Cengiz, et al. Journal of the American Ceramic Society 99.7 (2016): 2521-2530.

  8. "Properties of geopolymer composites reinforced with basalt chopped strand mat or woven fabric." Ribero, Daniel, and Waltraud M. Kriven. Journal of the American Ceramic Society 99.4 (2016): 1192-1199.

  9. "The Change of X-ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders." Lebrun, Jean-Marie, et al. Journal of the American Ceramic Society 99.3 (2016): 765-768.

  10. "Electric field induced texture in titania during experiments related to flash sintering." Jha, S. K., et al. Journal of the European Ceramic Society 36.1 (2016): 257-261.

  11. "Resistance Fluctuation Spectroscopy of Charge Stripes and Intertwined Orders in the Phase Diagram of La2-xBaxCuO4." Weis, Adam, et al. APS March Meeting Abstracts. 2016.

2015

  1. "Ceramic Felt Reinforced Geopolymer Composites." Koehler, Elias C., and Waltraud M. Kriven. Developments in Strategic Ceramic Materials: Ceramic Engineering and Science Proceedings, Volume 36 8 (2015): 11.

  2. "Properties Of Granite Powder Reinforced Potassium Geopolymer." Roper, Daniel S., Gregory P. Kutyla, and Waltraud M. Kriven. Developments in Strategic Ceramic Materials: Ceramic Engineering and Science Proceedings, Volume 36 8 (2015): 3.

  3. "Thermal Expansion of the Orthorhombic Phase in the Ln2TiO5 System." Seymour, Kevin C., Robert W. Hughes, and Waltraud M. Kriven. Journal of the American Ceramic Society 98.12 (2015): 4096-4101.

  4. "Design and fabrication of ceramic beads by the vibration method." Santos, Christian J. Espinoza, et al. Journal of the European Ceramic Society 35.13 (2015): 3587-3594.

  5. "Refractory composite comprising a geopolymer and method of making a refractory composite." Kriven, Waltraud M., and Gregory Kutyla. U.S. Patent Application No. 14/832,484.

  6. "Crystal structure and thermal expansion of a CsCe₂Cl₇ scintillator." Zhuravleva, M., et al. Journal of Solid State Chemistry 227 (2015): 142-149.

  7. "Synthesis of LiFePO₄ powder by the organic-inorganic steric entrapment method." Ribero, Daniel, and Waltraud M. Kriven. Journal of Materials Research 30.14 (2015): 2133-2143.

  8. "Highly porous geopolymers through templating and surface interactions." Glad, Brayden E., and Waltraud M. Kriven. Journal of the American Ceramic Society 98.7 (2015): 2052-2059.

  9. "Effects of time, temperature, and pressure on the microstructure of spark plasma sintered silicon carbide." Carlson, Thomas A., et al. J Ceram Process Res 16.3 (2015): 303-307.

  10. "Structural effect of aliovalent doping in lead perovskites." Tolman, Kevin R., et al. Journal of solid state chemistry 225 (2015): 359-367.

  11. "Emergence and extinction of a new phase during on-off experiments related to flash sintering of 3YSZ." Lebrun, Jean-Marie, et al. Journal of the American Ceramic Society 98.5 (2015): 1493-1497.

  12. "Combinatorial Deposition of La2-xBaxCuO4 Thin Films Across the x= 1/8 Anomaly." Lane, Justin, et al. APS Meeting Abstracts. 2015.

  13. "Mapping the Striped Phase Diagram of La2-xBaxCuO4 with Resistance Fluctuation Spectroscopy." Weis, Adam, et al. APS Meeting Abstracts. 2015.

  14. "Experimental study of nonlinear acoustic bands and propagating breathers in ordered granular media embedded in matrix." Hasan, M. Arif, et al. Granular Matter 17.1 (2015): 49-72.

  15. "Wave propagation through alumina-porous alumina laminates." Sellappan, Pathikumar, et al. Journal of the European Ceramic Society 35.1 (2015): 197-210.

  16. "Rice husk ash as a silica source in a geopolymer formulation." Heo, Un Haeng, et al. Developments in Strategic Materials and Computational Design V: A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites January 27-31, 2014 Daytona Beach, Florida. John Wiley & Sons, Inc., 2015.

  17. "In situ carbothermal reduction/nitridation carbon-nano powder added geopolymer composites." Bagci, Cengiz, Greg Kutyla, and Waltraud M. Kriven. Developments in Strategic Materials and Computational Design V, Ceramic Engineering and Science Proceedings. Hoboken, NJ: John Wiley & Sons 35 (2015): 15-28.

  18. "Potassium geopolymer reinforced with alkali-treated fique." Sankar, Kaushik, and Waltraud M. Kriven. Developments in Strategic Materials and Computational Design V, edited by WM Kriven, D. Zhou, K. Moon, T. Hwang, J. Wang, C. Lewinssohn and Y. Zhou, Cer. Engr. Sci. Proc. 38 (10) (2015): 61-78.

  19. "Sodium geopolymer reinforced with jute weave." Sankar, Kaushik, and Waltraud M. Kriven. Developments in Strategic Materials and Computational Design V, edited by WM Kriven, D. Zhou, K. Moon, T. Hwang, J. Wang, C. Lewinssohn and Y. Zhou, Cer. Engr. Sci. Proc. 38 (10) (2015): 39-60.

2014

  1. "Lattice constant prediction of defective rare earth titanate perovskites." Letourneau, Steven, et al. Journal of Solid State Chemistry 219 (2014): 99-107.

  2. "Development of a Gas-Fed Plasma Source for Pulsed High-Density Plasma/Material Interaction Studies." Pachuilo, Michael V., et al. IEEE Transactions on Plasma Science 42.10 (2014): 3245-3252.

  3. "High-Temperature Properties and Ferroelastic Phase Transitions in Rare-Earth Niobates (LnNbO4)." Sarin, Pankaj, et al. Journal of the American Ceramic Society 97.10 (2014): 3307-3319.

  4. "Synthesis and Thermal Expansion of β-Eucryptite Powders Produced by the Inorganic-Organic Steric Entrapment Method." Seymour, Kevin C., and Waltraud M. Kriven. Journal of the American Ceramic Society 97.10 (2014): 3087-3091.

  5. "Synthetic Aragonite (CaCO3) as a Potential Additive in Calcium Phosphate Cements: Evaluation in Tris-Free SBF at 37°C." Lee, Jin H., et al. Journal of the American Ceramic Society 97.10 (2014): 3052-3061.

  6. "Characterization of tetragonal-monoclinic, ferroelastic transformation and domain boundaries in zirconia-alloyed yttrium tantalate." Baram, Mor, et al. Microscopy and Microanalysis 20.S3 (2014): 1930-1931.

  7. "Thermal Expansion of Ln₆WO₁₂ (Ln= Y, Ho, Er, Yb) and Ln₂WO₆ (Ln= Gd, Dy, Ho)-an In Situ Synchrotron X-ray Diffraction Study." Apostolov, Zlatomir D., et al. Journal of the American Ceramic Society 97.8 (2014): 2496-2505.

  8. "Thermal expansion of hfo2 and zro2." Haggerty, Ryan P., et al. Journal of the American Ceramic Society 97.7 (2014): 2213-2222.

  9. "Predicting failure: Acoustic emission of berlinite under compression." Nataf, Guillaume F., et al. Journal of Physics: Condensed Matter 26.27 (2014): 275401.

  10. "The tetragonal-monoclinic, ferroelastic transformation in yttrium tantalate and effect of zirconia alloying." Shian, Samuel, et al. Acta Materialia 69 (2014): 196-202.

  11. "In Situ Synchrotron X-Ray Diffraction Study of the Rhombohedral-to-HT-Cubic Phase Transformation in Ln6WO12 (Ln= Y, Ho, Er, Yb)." Apostolov, Zlatomir D., et al. Journal of the American Ceramic Society 97.4 (2014): 1256-1263.

  12. "In situ mechanical properties of chamotte particulate reinforced, Potassium Geopolymer." Musil, Sean S., and Waltraud M. Kriven.Journal of the American Ceramic Society 97.3 (2014): 907-915.

  13. "Green composite." Musil, Sean S., P. F. Keane, and W. M. Kriven. Developments in Strategic Materials and Computational Design IV-37th International Conference on Advanced Ceramics and Composites, ICACC 2013. 2014.

  14. Q-State Monte Carlo Simulations of Anisotropic Grain Growth in Single Phase Materials. Allen, Jeffrey B., et al. John Wiley & Sons, Inc., 2014.

  15. "Dielectric and Piezoelectric Properties of Sr and La CO-Doped PZT Ceramics." Kalem, Volkan, and Muharrem Timucin. Developments in Strategic Materials and Computational Design IV (2014): 309-320.

  16. "Geopolymer with Hydrogel Characteristics via Silane Coupling Agent Additives." Glad, Brayden E., and Waltraud M. Kriven. Journal of the American Ceramic Society 97.1 (2014): 295-302.

2013

  1. “CTEAS: A GUI Based Program to Determine Thermal Expansion from HTXRD,” Z.A. Jones, P. Sarin, R.P. Haggerty, and W.M. Kriven,  Journal of Applied Crystallography, Vol. 46, 550 – 553 (2013)

  2. “In-situ Synchrotron X-ray Diffraction Study of the Cubic to Rhombohedral Phase Transformation in Ln6WO12 (Ln = Y, Ho, Er, Yb),” Z. D. Apostolov, P. Sarin, R. P. Haggerty, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 96 [3], 987 – 994 (2013)

  3. “Alumina Region of the Lithium Aluminosilicate System: a New Window for Temperature Ultrastable Materials Design,” Olga Garcia-Moreno, W. M. Kriven, Jose S. Moya, Ramon Torrecillas, J. Am. Ceram. Soc. Communication, in press (2013)

  4. “Primary Pulse Transmission in Coupled Steel Granular Chains Embedded in PDMS Matrix: Experiment and Modeling,” M. Arif Hasan, Shinhu Cho, Kevin Remick, Alexander F. Vakakis, D. Michael McFarland and Waltraud M. Kriven. International Journal of Solids and Structures, in press (2013).

  5. “The Effective Size of Vacancies in Aliovalently Doped SrTiO3 Perovskites, ” Rick Ubic, Kevin Tolman, Kokfoong Chan, Nicole Lundy, Steven Letourneau, Waltraud M. Kriven, J. Alloys and Compounds, 575 239-245 (2013).

  6. “Optimization of Gas Adsorption Porosimetry for Geopolymer Analysis,” Brayden E. Glad and Waltraud M. Kriven, J. Am. Ceram. Soc., in press (2013).

  7. “Green Composite: Sodium-based Geopolymer Reinforced with Chemically Extracted Corn Husk Fibers,” S. S. Musil, P. F. Keane and W. M. Kriven. Cer. Sci. and Eng. Proc., in press (2013).

  8. “Geopolymer with Hydrogel Characteristics via Silane Coupling Agent Additives,” B. E. Glad and W. M. Kriven, J. Am. Ceram. Soc., in press (2013).

  9. “Crackling Noise During Failure of Alumina under Compression: Effect of Porosity,” Pedro O. Castillo-Villa, Jordi baro, Antoni Planes, Ekhard K. H. Salje, Pathikumar Sellappan, Waltraud M. Kriven and Eduard Vives, J. Physics: Condensed Matter, in press (2013).

  10. “A Forming Technique to Produce Spherical Ceramic Beads using Sodium Alginate as a Precursor Binder Phase,” C. J. Espinsoza Santos, T.-S. Wei, B. Cho and W. M.. Kriven, J. Am. Ceram. Soc., accepted (2013)

2012

  1. “Effect of Polymer Addition on the Crystallite Size and Sinterability of Hydroxyapatite Prepared with CaO Powder and Phosphoric Acid,” S.-J. Lee, Ji-Yeon Kwak and W. M. Kriven, J. Ceramic Processing Research 13 [3] 243-247 (2012)

  2. “Humidity Effects on the Completion of Geopolymerization in Dilute Evaporative Slurries,” B. E. Glad and W. M. Kriven, Cer. Sci. and Eng. Proc. 33 [10] 25-30 (2012)

  3. “The Effect of Basalt Chopped Fiber Reinforcement on the Mechanical Properties of Potassium Based Geopolymer,” S. S. Musil, G. P.  Kutyla and W. M. Kriven, Cer. Sci. and Eng. Proc. 33 [10] 31-42 (2012)

  4. “The Effect of 3Y2O3-ZrO2 Produced by the Steric Entrapment Method on the Mechanical and Sintering Properties of Cr3C2 Based Cermets,” A. Ozer, W. M. Kriven and Y. K. Tür, Mater. Sci. and Eng. A, 556, 878-884 (2012)

  5. “Polymer Adhesion to Geopolymer via Silane Coupling Agent Additives,” B. E. Glad, C. Han and W. M. Kriven, J. Amer. Ceram. Soc., in press (2012)

  6. “In-situ Synchrotron X-ray Diffraction Study of the Cubic to Rhombohedral Phase Transformation in Ln6WO12 (Ln = Y, Ho, Er, Yb), ” Z. D. Apostolov, P. Sarin, R. P. Haggerty, W. M. Kriven. J. Amer. Ceram. Soc., in press (2012)

  7. “Thermal Properties and Phase Transition of 2ZrO2•P2O5 Studied by In Situ, X-ray Synchrotron Diffraction,” J. Angelkort, P. Sarin, Z. D. Apostolov, Z. A. Jones and W. M. Kriven. J. Amer. Ceramic Soc., in press (2012)

2011

  1. “Effect of Polymer Addition on Sinterability of Hydroxyapatitie Fabricated by using Eggshell and Phosphoric Acid,” S.-J. Lee and W. M. Kriven, Metals and Materials International, in press (2011).

  2. “Fibrous Monolithic, Calcium Phosphate Composite for Controlled Bone Growth,” Dong-Kyu Kim, Natalie L. Smith, L. John Farner IV and Waltraud M. Kriven. J. Amer. Ceram. Soc., in preparation (2011).

  3. “Synthesis of Nanocrystalline Titanate Powders via an Ethylene Glycol, Steric Entrapment Route,” Benjamin R. Rosczyk, Sang-Jin Lee and Waltraud M. Kriven, J. Am. Ceram. Soc., in preparation (2011).

  4. “An Experimental Study on the Effects of SiC on the Mechanical and Sintering Properties of Cr3C2-NiCr Cermets,” A. Ozer and W. M. Kriven, Cer. Sci. and Eng. Proc. 32 in press (2011).

  5. “Microwave Enhanced Drying and Firing of Ceramics,” T. Gubb, I. Baranova, S. M. Allan, M. L. Fall, H. S. Shulman and W. M. Kriven, Cer. Eng. Sci. Proc. 32 [10] in press (2011).

  6. Ozer, A., Kriven, W.M., Tur, Y.K. An experimental study on the effects of SiC on the sintering and mechanical properties of Cr3C2-NiCr cermets 2011) Ceramic Engineering and Science Proceedings, 32 (2), pp. 271-279.

2010

  1. “Porous Biphasic Calcium Phosphate scaffolds from Cuttlefish Bone,” P. Sarin,  S.–J. Lee, Z. D. Apostolov and W. M. Kriven, J. Amer. Ceram. Soc., in print (2010).

  2. “Sintering Behavior and Biocompatibility of Calcium Phosphates Fabricated by Cuttlefish Bone and Phosphoric Acid,” S.-J. Lee, M.-H. Lee, W. M. Kriven and N.-S. Oh, Tissue Engtineering and Regenerative Medicine, 7 [5] 556-560 (2010).

  3. “Properties of Basalt Fiber Reinforced Geopolymer Composites,” E. Rill, D. Lowry and W. M. Kriven, in Strategic Materials and Computational Design, edited by Waltraud M. Kriven, Yanchun Zhou and Miladin Radovic. Cer. Eng. Sci. Proc. 31 [10] 57-69 (2010).

  4. “Effect of High Tensile Strength Polypropylene Chopped Fiber Reinforcements on the Mechanical Properties of Sodium Based Geopolymer Systems,” D. R. Lowry and W. M. Kriven, in Strategic Materials and Computational Design, edited by Waltraud M. Kriven, Yanchun Zhou and Miladin Radovic. Cer. Eng. Sci. Proc. 31 [10] 47-56 (2010).

  5. “Fabrication of Structural, Leucite Glass-Ceramics from Potassium-Based Geopolymer Precursors,” N. Xie, J. L. Bell and W. M. Kriven, J. Amer. Ceram. Soc., 93 [9] 2644-2649 (2010).

  6. “Weakening of Alkali-Activated Metakaolin during Aging Investigated by the Molybdate Method and Infrared Absorption Spectroscopy,” C. H. Rüscher, E. Mielcarek, W. Lutz, A. Ritzmann and W. M. Kriven, J. Amer. Ceramic Society, 93 [9] 2585-2590 (2010).

  7. “In-situ Studies of Oxidation of ZrB2 and ZrB2-SiC Composites at High Temperatures,” P. Sarin, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell and W. M. Kriven, J. European Ceramic Society, 30 2375-2386  (2010).
  8. “Powder Diffraction by Fixed Incident Angle Reflection Using a Curved Position Sensitive Detector,” Ryan P. Haggerty, Pankaj Sarin, Jean-Francois Berar, Zlatomir Apostolov and Waltraud M. Kriven, Journal of Applied Crystallography, 43, 560-569 (2010).

  9. “The Ageing Process of Alkali Activated Metakaolin,” C. H. Rüscher, E. Mielcarek, W. Lutz, A. Ritzmann and W. M. Kriven, Microporous Mesoporous Materials, Proc. of Pacrim 09, 215 315-324  (2010).

2009

  1.  “Formation of an Iron-Based Geopolymer Analogue,” J. L. Bell and W. M. Kriven, Cer. Eng. and Sci. Proceedings Vol 30, issue 2, pp x-x. “Mechanical Properties and Performance of Engineering Ceramics and Composites IV.  Edited by Dileep Singh and Waltraud M. Kriven, Ceramic Engineering and Science Proceedings, Vol 30, issue [2] 301-312 (2009).

  2. “A Curved Image Plate Detector System for High Resolution Synchrotron X-Ray Diffraction,” P. Sarin, R.P. Haggerty, W. Yoon, M. Knapp, A. Berghauser, P. Zschack, E. Karapetrova, N. Yang and W. M. Kriven, Journal of Synchrotron Radiation, 16 part [2] 273-282 (2009).

  3. “Formation of Ceramics from Metakaolin-based Geopolymers: Part II. K-based Geopolymer,” J. L. Bell, P. E. Driemeyer and W. M. Kriven, J. Amer. Ceram. Soc., 92 [3] 607-615 (2009).

  4. “Formation of Ceramics from Metakaolin-based Geopolymers: Part I. Cs-based Geopolymer,” J. L. Bell, P. E. Driemeyer and W. M. Kriven, J. Amer. Ceram. Soc., 92 [1] 1551-2916 (2009).

2008

  1. “X-ray Pair Distribution Function Analysis of Potassium Based Geopolymer,”     J. L. Bell, P. Sarin, P. E. Driemeyer, R. P. Haggerty, P. J. Chupas and W. M. Kriven, Journal of Materials Chemistry, J. Mater. Chem., 18 [48], 5974 - 5981 (2008).

  2. “Thermal, Mechanical and Phase Stability of LaCoO3 in Reducing and Oxidizing Environments,” M. Radovic, S. A. Speakman, L. F.  Allard, E. A. Payzant, E. Lara-Curzio, W. M. Kriven, J. Lloyd, L. Fegely, N. Orlovskaya, J. Power Sources, 184 77-83 (2008).

  3. “Preparation of Ceramic Foams from Metakaolin-based Geopolymer Gels,” J. L. Bell and W. M. Kriven Cer. Eng. and Sci Proc., vol 29 (2008). In Developments in Strategic Materials. Edited by Hua-Tay Lin, Kunihito Koumoto, Waltraud M. Kriven, David P. Norton, Edwin Garcia and Ivar Reimanis, Vol 29 issue 10 pp 97-112 (2008).

  4. “Atomic Structure of a Cesium Aluminosilicate Geopolymer: A Pair Distribution Function Study,” J. L. Bell, P. Sarin, J. L. Provis, R. P. Haggerty, P. E. Driemeyer, P. J. Chupas, J. S. J. van Deventer and W. M. Kriven, Chemistry of Materials, 20 [14] 4768-4776 (2008).

  5. “Temperature Dependence of Silicon Hardness: Experimental Evidence of Phase Transformations,” Vladislav Domnich, Yvonne Aratyn, Waltraud M. Kriven and Yuri Gogotsi, Reviews on Advanced Materials Science, 14 14-34 (2008).

  6. “Creep Characteristics of Alumina, Nickel Aluminate Spinel, Zirconia Composites,” R. P. Dillon, D.-K. Kim. J. E. R Tujillo, W. M. Kriven and M. L. Mecartney, J. Materials Research, 23 [2] 556-564 (2008).

  7. “Processing and Characterization of Multiphase Ceramic Composites. Part III: Strong, Hard and Tough, High Temperature, Quadruplex and Quintuplex Composites,” D. K. Kim and W. M. Kriven. J. Amer. Ceram. Soc., 91 [3] 799-805 (2008).

  8. “Processing and Characterization of Multiphase Ceramic Composites. Part II: Triplex Composites with a Wide Sintering Temperature Range,” D. K. Kim and W. M. Kriven. J. Amer. Ceram. Soc., 91, [3] 793 – 798 (2008).

2007

  1. “A Polymer Solution Technique for the Synthesis of Nano-sized Li2TiO3 Ceramic Breeder powders,” Ch.-H. Jung, S.-J. Lee, W. M. Kriven, J.-Y. Park and W.-S. Ryu, Journal of Nuclear Materials, 373 194-198 (2007).

  2. “Processing and Characterization of Multiphase Ceramic Composites. Part I: Duplex Composites Formed In-Situ” D.-K. Kim and W. M. Kriven, J. Amer. Ceram. Soc., 91 [3] 784-792 (2007).

  3. “Sintering Behavior of Gehlenite. Part II. Microstructure and Mechanical Properties” D. Jia and W. M. Kriven, J Amer. Ceram. Soc., 90 [8] 2766-2770 (2007).

  4. “Sintering Behavior of Gehlenite. Part I. Self-forming, Macro-/Mesoporous Gehlenite – Pore Forming Mechanism, Microstructure, Mechanical and Physical Properties,” D. Jia, D.-K. Kim and W. M. Kriven, J Amer. Ceram. Soc., 90 [6] 1760-1773 (2007).

  5. “Phase Transformations in the High Temperature Form of Pure and TiO2 -stabilized Ta2O5”, G. L. Brennecka, D. A. Payne, P. Sarin J.-M. Zuo and W. M. Kriven, J. Am. Ceram. Soc., 90 [9] 2946-2953 (2007).

  6. “Effect of Transition-metal-ion doping on High Temperature Thermal Expansion of 3:2 Mullite – An In-situ, High Temperature, Synchrotron diffraction Study,”   P. Sarin, W. Yoon, R. P. Haggerty, N. C. Bhorkar, C. Chiritsecu and W. M. Kriven, J. Europ. Ceram. Soc., 28 353-365 (2007).

  7. “Growth of Textured Mullite Fibers using a Quadrupole Lamp Furnace,” W. Yoon, P. Sarin and W. M. Kriven, J. Europ. Ceram. Soc., 28 455-463 (2007).

  8. “Intrinsic Microstructure and Properties of Metakaolin-Based Geoolymers,”      W. M. Kriven, J. L. Bell, S. W. Mallicoat and M. Gordon, contributed chapter to Proc. of Int. Worshop on Geopolymer Binders – Interdependence of Composition, Structure and Properties, Weimar, Germany, 71-86 (2007).

  9. “Effect of Alkali and Si/Al Ratio on the Development of Mechanical Properties of Metakaolin-based Geopolymers,” P. Duxson, S. W. Mallicoat G. C. Lukey, W. M. Kriven and J. S. J. van Deventer, Colloids and Surfaces A-Physicochemical and Engineering Aspects, 292 8-20 (2007).

 

Prof. Trudy Kriven • Phone: 217-333-5258 • Fax: 217-333-2736 • Email: kriven@illinois.edu
Department of Materials Science and Engineering • University of Illinois at Urbana-Champaign